What is the difference between a gimbal and a stabilizer?

Category:Exhibition    Author:Administrators    Source:This website}    Release time:2021-02-18

5.jpg

 

The difference between a gimbal and a stabilizer is that the gimbal is used for mounting cameras, is hard connected, and cannot filter out small vibrations. Stabilizers can filter out small vibrations, making the image more stable. Generally speaking, five axis is more sufficient.

 

The gimbal is a supporting device for installing and fixing cameras, which is divided into two types: fixed gimbal and electric gimbal. Fixed gimbal is suitable for situations where the monitoring range is not large. After installing the camera on the fixed gimbal, the horizontal and vertical angles of the camera can be adjusted. Once the best working posture is achieved, simply lock the adjustment mechanism. Electric pan tilt zoom is suitable for scanning and monitoring a large area, and it can expand the monitoring range of the camera. The high-speed attitude of the electric gimbal is achieved by two executive motors, which receive signals from the controller to accurately operate and position. Under the control signal, the camera on the gimbal can automatically scan the monitoring area and track the monitored object under the manipulation of the monitoring center duty personnel.

 

A stabilizer is a tool used to keep the slender drill rod running smoothly while the drill string rotates at high speed inside the hole, so that the axis of the drill bit is as close to the centerline of the borehole as possible. It is also known as a stabilizer. The stabilizing effect is mainly to reduce the severe radial and axial vibrations of the drill string elastic system inside the hole; Reduce eccentric wear of drill bits and rods; Ensure the quality of heart sampling; Prevent wellbore deviation or use manual directional drilling. The structure of the stabilizer is relatively simple, consisting of thick diameter joints with rib segments (straight or spiral). Also known as a stabilizer, it is a tool used to stabilize downhole drilling tools and prevent tilting. A device connected to a section of drill string near the large-diameter drilling tool to stabilize the drilling direction.