Based on the requirements for the construction of human temperature measurement warning and control services during public health emergencies, thermal imaging temperature measurement gate machines provide two application modes. One is the offline deployment mode, and the other is the networked deployment mode.
Thermal imaging temperature measurement gatekeeper mode one: offline temperature measurement screening
This mode is mainly used for quickly setting up local network thermal imaging temperature measurement cameras and temperature measurement barrier devices for single sites or entrances with high pedestrian flow. The temperature monitoring and real-time alarm of pedestrian channels are carried out through the alarm management software on the computer.
For sudden public health emergencies, this mode can be used to quickly implement temperature sensing for public personnel, proactively detect individuals with abnormal body temperatures, and improve emergency response efficiency.
Thermal imaging temperature measurement gatekeeper mode 2: networked temperature measurement screening
This mode is mainly used for monitoring multiple pedestrian entrances and exits within a park or park area. By installing fixed points, multiple human temperature measurement points are connected to form a full coverage monitoring of large transportation hubs, medium and large schools, and park entrances and exits. The monitoring center realizes global remote monitoring of the controlled area to avoid cross infection. The Hemudu Scheme Museum will provide separate explanations for this model.
Application scenarios of thermal imaging temperature measurement gate guard machine
For temperature measurement stations with professional personnel on duty, such as passenger stations, train stations, subway stations, airports, etc., where passengers pass through security checkpoints in an orderly manner, it is only necessary to deploy a human body temperature measurement binocular camera (with built-in sound and light alarms) and a high-precision human body temperature measurement blackbody at each entrance, connect it to the on-site computer for configuration management, and achieve temperature detection of passing personnel. If the temperature is abnormal, an alarm will be triggered to remind the on duty personnel for further disposal.
How to adjust the position deviation of the conveyor belt with the intransitive verb of the thermal imaging temperature measurement gatekeeper?
1. Start the conveyor belt to run forward. If the conveyor belt tilts towards the national standard side, loosen the fixing screw 6, adjust the left deflection adjustment roller 3, and reduce the distance between GE. If the belt deviates from one side; Increase the distance between them;
2. In reverse operation, the deflection adjustment roller 3 on the right side can be adjusted. If the belt is biased towards the national standard side, the distance between the discs can be increased; If leaning towards the HC side, the distance between CDs can be reduced;
3. Do not adjust too much distance at once - after each adjustment, let the belt run for about 5 minutes - make the belt run smoothly. Then make a second adjustment until the belt does not deviate. The entire adjustment process must be repeated patiently - pay attention to safety and do not grab belts or clothes with your hands. After adjustment, tighten the fixing screws.
